Armus POSEIDON EXTREME

Epoxy conversion primer with corrosion and osmosis protection
Slide 1

POSEIDON EXTREME


Size

32 oz

Color

Black
Bright White
Cream
Battleship Gray

Contact Sales →

Poseidon Extreme is a high solids coating that offers a hassle-free transition from antifouling and harmful bottom paints to a biocide-free topcoat, like Armus Hull Pro. With this conversion primer, Armus Marine enables vessel owners to save significantly on labor costs that would otherwise be incurred in the removal of antifouling paints. Make the switch effortlessly, ensuring a cleaner and more environmentally-friendly coating for your vessel.

EXCEPTIONAL CORROSION & HULL OSMOSIS PROTECTION
As a durable epoxy marine primer, Poseidon Extreme stands as a robust shield against hull osmosis and corrosion on metal surfaces. When applied correctly, it forms a resilient barrier, safeguarding your vessel in both fresh and saltwater environments. Trust Poseidon Extreme to maintain the integrity of your boat, both above and below the waterline, extending its longevity and enhancing overall performance.

TECHNICAL INFORMATION

Type Epoxy polamide
Color

Solid: Available in Black or White

Components Part A (Base) + Part B (Hardener)
Mixing Ratio 4:1 A:B per volume
VOC Content

<300 g/L

Solids by Volume 80%
Flash Point >140°F (60°C)

APPLICATION INFORMATION

Coverage (Single-application) 32oz Primer / 17 oz Topcoat - ~15 linear feet
64 oz Primer / 32 oz Topcoat - ~23 linear feet
Application Temperature 41–95°F (5–35°C)
Substrate Application Temperature 41–95°F (5–35°C)
Maximum Pot Life (for both Primer & Topcoat) ~45 min @ 68°F (20°C)
Touch-Dry Time per Coat
3 h @ 68°F (20°C)
Dry Through Time / Curing Time per Coat ~24 h @ 68°F (20°C)
Minimum Coating Interval between Primer & Topcoat ~24 h @ 68°F (20°C)
Minimum Time to Launch ~72 h @ 68°F (20°C) (48 hours after full cure)
MConnect Diagram
Hull Pro

HULL PRO COVERAGE CALCULATOR

We’ve created a helpful guide for calculating how much Hull Pro you need for your vessel.

NOTE: Estimate based on roller and tipping brush application.

Lower units: Add one 8.5oz kit per twin engine rig.

(using whole numbers between 15 and 60)

Send a message
Prove you’re human:
Thank you!
Message sent, we will contact you soon.
Error
Sorry, there was an error sending your message.
WhatsApp